The TP Link Wireless Bridge Kit provides a long range or outdoor access point for internet access up to 5 km away from your router. This kit provides speeds of up to 867 Mbps on the 5 Ghz wireless data rate, auto-pairing and 3 Gigabit internet points for more high-speed connections. The IP65 weatherproof enclosure and 6kV lightning protection ensures this unit will handle most requirements and most environments.
802.11ac for up to 867 Mbps on the 5 GHz wireless data rate.*1
Ideal for long-range wireless transmission .*2
Auto-pairing and agile LEDs for efficient deployment.
3× Gigabit Ethernet ports for more high-speed IP camera connections.*6
Supports Omada SDN for remote and centralised management.
IP65 weatherproof enclosure and 6kV lightning protection ensure all-weather suitability.*3
Supports Passive PoE for flexible deployment (adapter included).
*1. Maximum wireless transmission rates are the physical rates derived from IEEE Standard 802.11 specifications. Range and coverage specifications, along with the number of connected devices, were defined according to test results under normal usage conditions. Actual wireless transmission rate, wireless coverage, and number of connected devices are not guaranteed and will vary as a result of 1) environmental factors, including building materials, physical objects, and obstacles; 2) network conditions, including local interference, volume and density of traffic, product location, network complexity, and network overhead; and 3) client limitations, including rated performance, location, connection quality, and client condition.
*2. All products are tested in real outdoor environments. Actual range and throughput depend on the transmission power and environmental factors such as wireless interference, obstacles, weather, etc.
*3. Protection against lightning and electro-static discharge may be achieved through proper product setup, grounding, and cable shielding. Refer to the instruction manual and consult an IT professional to assist with setting up this product.
*4. These functions require the use of an Omada SDN controller.
*5. Coverage value is calculated based on laboratory testing. Actual coverage is not guaranteed and will vary as a result of client limitations and environmental factors.
*6. Non-Omada devices connected to the wired LAN ports will not be recognised by the Omada controllers, preventing users from viewing their connection status. To address this issue, connect those non-Omada devices to an Omada switch that links to the bridge's wired LAN ports.
