Kleanium 3D Resin Cleaning Solution is a non-flammable, effective cleaner designed for UV resin. Unlike isopropyl alcohol (IPA), Kleanium thoroughly breaks down resin, leaving no residue.
Available in a 2L bottle
Directions
Use Kleanium undiluted. Submerge the printed object until uncured resin is removed. For better results, use with an ultrasonic cleaning bath, or assist with a soft brush. After cleaning, blow off excess liquid with compressed air or pat dry with a lint-free cloth. Post-cure under a 405nm LED light for 5 minutes at 30 watts, then rinse with tap water. For cleaning vats and tools, rinse or wipe with Kleanium, then wash with water.
