Kleanium 3D Resin Cleaning Solution is a non-flammable, effective cleaner designed for UV resin. Unlike isopropyl alcohol (IPA), Kleanium thoroughly breaks down resin, leaving no residue.
Use Kleanium undiluted. Submerge the printed object until uncured resin is removed. For better results, use with an ultrasonic cleaning bath, or assist with a soft brush. After cleaning, blow off excess liquid with compressed air or pat dry with a lint-free cloth. Post-cure under a 405nm LED light for 5 minutes at 30 watts, then rinse with tap water. For cleaning vats and tools, rinse or wipe with Kleanium, then wash with water.
