
eSUN epoxy based standard resin can be used for functional testing and rapid prototype printing. Finished models are required to clean by high-concentration alcohol (>95%) for about 30 seconds.
Features:
• Fast print speed
• High precision.
• High hardness and good wear resistance.
• Good moisture-resistance.
Specifications
• Wavelength (nm) : 395-405
• Density (g/cm3) : 1.08-1.13
• Viscosity (mPa.s) : 170-200
• Hardness (Shore D) : 78-82
• Tensile Strength (MPa) : 46-67
• Elongation at Break (%) : 28-36
• Flexural Strength (MPa) : 46-72
eSUN Grey Standard Resin 500g
Customer Reviews
5.0
1 review
Verified purchases only.
Powered by Bazaarvoice.
Great starter filament
I’ve been working with the grey resin for some time now and I’m still surprised with the fine details. Great for prototyping prints.