DSO Oscilloscope Probe Cable Set 100MHz

QC1904 – Passive Oscilloscope Probe

The QC1904 is a passive probe designed to work with any oscilloscope featuring a standard BNC input for measurement of intermediate and low frequency signals. 

This quality probe set consists of a 1.2m quality cord terminated at one end with a moulded-on stainless steel BNC connector and 1 x, 10x attenuator probe at the other end. An earthing lead 120mm long with alligator clip to connect to the probe at the other end is provided.

Key Features:

1. Input Voltage: x1:<200V DC +Peak AC ; x10: <600V DC +Peak AC

2. Bandwidth: x1 DC-6MHz, x10 DC to 100MHz

3. Attenuation ratio: 1X / 10X

4. Input impedance: x1: 85pF-115pF; x10:18.5pF-22.5pF

5. 120cm total length

Note: Not to be used for EHT (Extra High Tension) voltage.