This exceptional trouble shooting device is not just a watt meter it is an All-in-one power meter, volt meter, amp-hour meter, ammeter and energy meter. It’s designed for systems less than 60V and currents up to 200A (Peak). This genius device comes with high current connectors on both source and load end which makes it an easy fit into most high current DC set ups. It can check charge going to a battery from battery charger or alternator, solar panel output, charge controller output, health and performance of batteries, evaluate charging efficiency or measure power and energy consumption of any load device with a battery. The Watt Meter only requires a tiny 7mA draw to operate making little difference to power production during usage. Ideal for cars, boats, caravans, off-grid installations, Wind, solar installations, and so much more.
Features:
- High Current 50-Amp connectors
- 75A continuous / 200A Peak
- Up to 60VDC compatibility
- Accurate amps, volts, watts, amp-hours, watt-hours, peak amps, minimum volts (sag), peak watts
- Reads: 6V - 60V (0V - 60V with optional auxiliary battery).
- Measures:
Current - 0-200A @ 0.01A Resolution
Voltage - 0-60VDC @ 0.01V Resolution
Power - 0-6554W @ 0.1W Resolution
Watt Hours - 0-650kWh @ 0.1Wh Resolution
Ampere Hours - 0-6554Ah @ 0.01Ah Resolution
- Cable: 8AWG
-- Display: 16 x 2 backlit LCD Display
Width:110.0 mm
Height:45.0 mm
Depth:26.0 mm
Weight:150.0 g
200A DC Power Meter with High Current Connectors
(1)
$59.95
Bulk Pricing
Buy More, Save More! Bulk pricing applies automatically in cart.
Qty 1-3
$59.95 / unit
Qty 4-9
$53.95 / unit
Best Value
Qty 10+
$47.95 / unit
30-Day Returns
Australian Stock
Warranty Included
Checking delivery options...
Customer Reviews
2.0
1 review
5
0
4
0
3
0
2
1
1
0
Verified purchases only.
Powered by Bazaarvoice.
Not low voltage tolerant
I have used this power meter to good effect for many years however when I put one on for solar panel performance monitoring it seems the low voltages you get as the solar panels power down at the end of the day is not tolerated by this power meter and it glitches, then the screen freezes until source power is cut off and restored, at which time it starts again. I understand that the voltage range is 4-60 volts (as I recall) but the meter should not freeze when fed lower voltage.
No, I don't recommend this product.
Helpful?