10A Double GPO Power Point with In-built RCD



1/3
$60.95
Bulk Pricing
Qty 1 - 9
$60.95 / Unit
Qty 10 - 49
$53.95 / Unit
Qty 50 +
$47.95 / Unit
Store
Choose a store for stock availability
10A Double GPO Power Point with In-built RCD
$60.95
Designed to be a direct replacement for your standard GPO fittings, combining two standard 240AC 10A mains (GPO) outlets with a built-in RCD to provide protection against electrical shock. In the event of a fault with the connected appliance or accident, such as cutting through the mains lead, the unit will provide complete isolation from mains. A test button, status indicator, and reset button allows you to check the RCD, which we recommend should be done each time before use.Â
Meets Australian and New Zealand safety standards -Â Type- A
Please Note: This item should be installed by a licenced electrician.
Features:
- Electric shock protection
- LED status indicator
- Reset and test buttons
- Line power indicator
Specifications:
Specifications:
CD Classified: Type II
Rated Tripping Current: 30mA
Operating Speed: <40mS Max.
L/Nin-L/Nout: 2KV
Endurance: 2000 Cycles Minute
Contact Break:Â Double Pole
Standards: RCD Module-AS NZS 3190, Socket-AS NZS 3112
Minimum Back Box Depth: 35mm
Fixing Screws: M3.0 x 25mm
Cable Capacity: 4x2.5mm2,2x4mm2,1X6mm2Â
AC Voltage Rating
AC Voltage rating
240.0 V
AC Frequency
50.0 Hz
AC Current Rating
AC current rating
20.0 A
Plug or Socket
Device
Socket
Plug or Socket Type
Mains AU/NZ 3 Pin
Dielectric Withstanding Voltage
6.0 kV
Ingress Protection Rating
Dust/Particle Ingress Protection
3 - Objects > 2.5mm, Tools, thick wires etc
Liquid/Moisture Ingress Protection
0 - Not protected
IP Rating
30.0
Product Dimensions
Width
120.0 mm
Height
76.0 mm
Depth
50.0 mm
Weight
144.0 g
Packaged Dimensions
Packaged Dimensions
14.7cm(Length) x 8.1cm(Width) x 5.6cm(Height)